Check theres not a kink in the beam forcing pressure on the beam. If you are unsure which replacement tube you need then please give us a call on 01455 239 999, we will be happy to help. Check that the cap covering the valve is closed properly. Tent Model: Airbeam Exclusive Front Awning 500 The new AirSpeed valve is also now positioned on the tent in a more convenient location for inflating and deflating your tent. You will simply need to secure the valve in the correct location and fold back the excess before inflation, the housing sleeve will stop the tube from expanding any more than is required.
Replacement tubes may be supplied a little longer than the beam sleeve length, in some cases the replacement tube may be slightly longer and wider than your original (typically 10-30cm longer). Suitable for the following product codes: TELAWNINGAW1177, TEMAWNINGAW1177
Once the beam sleeve is zipped and secured, replace into the tent sleeve, inflate and you can get back to enjoying your holiday, as quick as that! The AirSpeed tubes are quick and easy to change, so that you can carry on with your camping holiday as soon as possible! Simply remove the old tube from the beam sleeve and replace with the new tube. Remove smaller screw-cap on valve and insert pump nozzle, of the Vango. Vango never comprise on quality, so you can feel confident that these products have been thoroughly tested and are built to Vango’s exacting standards. The Vango AirBeam pump is supplied with a pressure release valve which will release pressure if more than 7.5 - 8psi is put into the AirBeam.
It’s always a good idea to keep a spare AirSpeed tube with you to ensure that your holiday doesn’t come to an abrupt end.
0 kommentar(er)
